AML Assembler II
Company: Adecco USA
Posted on: June 26, 2022
Adecco Staffing is working with a manufacturing company in
Milford, NH who is looking for additional AML Assembler's on
multiple shifts! This is a Temp to Hire position. Pay:
- 1st Shift: $18.48 to $21.73 per hour based off experience
- 2nd Shift: $22.17 to $26.07 per hour based off experience
- 1st Shift: 7:00am to 3:30pm Monday through Friday
- 2nd Shift: 3:00pm to 11:30pm Monday through Friday JOB SUMMARY:
Under limited supervision, performs a variety of precision
soldering and assembly operations using a complete range of hand
tools and other production and test equipment. JOB FUNCTIONS: While
in the performance of job requirements, observes all safety
regulations including personal protective equipment applicable to
the use of electrical tooling and equipment and applicable to the
use of chemicals including, but not limited to, isopropyl alcohol,
flux, solder, glues and epoxies.
- Prepares molds.
- Wires, assembles fairings, laminates, tests and packs Swath
- Assembles a variety of bronze, stainless and commercial
transducers including correlation logs and seal-cast units.
- Strips and tins cables, solders connectors and preps
subassemblies, as required.
- Assembles product using calipers. Uses math skills to measure
depth and to calculate proper face height for commercial
- Utilizes test equipment such as transmitter box, multi-meter,
capacitance meter, HP4194A Impedance/Gain phase analyzer, ATS,
Oscilloscopes and other test equipment. Tests for speed, temp, and
depth reading on commercial units.
- Tests Smart - transducers with computer software program during
assembly process, as required.
- Uses lathe, belt sanders, drill press, milling machine, etc. to
machine parts as needed.
- Visually inspects parts prior to assembly. Assembles products
while maintaining proper productivity and quality levels.
- Identifies assemblies with paper tags, as required. Performs
required paperwork to ensure accurate inventory.
- As required, troubleshoots rejects and performs required
repair. Salvages materials from failed units wherever, whenever
- May mix epoxies.
- Places product on proper encapsulation rack. Fills out required
paperwork for encapsulation, as required.
- Applies paint, Glyptal or other finishes to final product using
the paint booth or other finishing equipment and tools.
- Interfaces with engineering on new commercial products to
ensure a smooth transition into production. Verifies new work
instructions to engineering requirements.
- Performs material handling functions as needed.
- Utilizing the computer system, prints BOMs and verifies
requirements and available inventories.
- Completes daily labor ticket and required paperwork.
- May perform any/all duties of AML Assembler I.
- Maintains a clean and orderly work area.
- Keeps tools and equipment clean and in proper condition.
- Performs other related duties as may be required or
- Ability to interact positively as a team member with co-workers
and supervision. EDUCATION/EXPERIENCE:
- High school education or equivalent education.
- Three or more years' experience as Transducer Assembler III, or
one or more years' experience as HPG Assembler I, or equivalent
- Basic math skills, ability to read wiring diagrams, use of
- Ability to lift up to 50 lbs.
- Good visual acuity and good manual dexterity. BASIC
- Able to read, write and perform basic math functions. Ability
to stand to perform duties and occasionally lift up to 50lbs.
Blueprint reading desirable. PHYSICAL REQUIREMENTS:
- The ability to bend downward and forward by bending spine at
the waist; bend legs at knee to come to rest on knee or knees, bend
the body downward and forward by bending leg and spine; extend
hand(s) and arm(s) in any direction; use upper extremities to press
against something with steady force in order to thrust forward,
downward, or outward; use upper extremities to exert force in order
to draw, grab, haul or tug objects in a sustained motion; raise
objects from a lower to higher position or move objects
horizontally from position to position; to pinch, pick or otherwise
primarily work with fingers. Primary functions are performed
- Ability to wear protective clothing such as gloves, safety
glasses and/or safety shoes as required.
- Visual acuity sufficient for work which deals largely with
mechanical assembly and/or visual inspection involving small
- Ability to perform repetitive or routine duties working from
detailed instructions and under standard procedures.
- Ability to endure periods of heavy workload. If you meet these
criteria and are interested in this position or others available,
please either apply below, email an updated resume to
Matt.Cram@adeccona.com, or give our office a call at 603-355-8310
and ask for Matt Cram.Equal Opportunity
Employer/Veterans/DisabledTo read our Candidate Privacy Information
Statement, which explains how we will use your information, please
navigate to https://www.adeccousa.com/candidate-privacyThe Company
will consider qualified applicants with arrest and conviction
Keywords: Adecco USA, New England , AML Assembler II, Other , Milford, Northeast
Didn't find what you're looking for? Search again!